If you aren’t confident in your knowledge of one of the following subjects, go back to the relevant lesson in the course to give it a review.

• OPERATION CLEAN SWEEP® (OCS) is an international program designed to prevent plastic pellet loss and the potential introduction of pellets to the marine environment where they create both a litter problem and a threat to marine and wildlife.
• Bob-tail trucks have a much tighter turning radius than tractor trailers.
• Wear gloves at all times when outside of the truck, especially when working on equipment.
• Regular Roll-off Pan: Designed to contain material, does not automatically dewater, must be dewatered manually.
• Trailer length Pan: Approximately (3) feet longer than a regular pan and can only be hauled on trailers.
• The parking brake must be set before exiting the cab to load or offload any pan using the exterior controls.
• Spotter – Where required, driver will yield to the spotter at all times before unloading pan then proceed according to spotter’s guidance.
• To avoid chunks/lumps from traveling far distance once dumped it is best practice to set the pan on the ground before dumping.
• Chains should never be loose or hanging, always tighten the chains after the door has been closed.
• All pan numbers must be verified by the driver before closing the ticket.